Skip to main content
Use this page as the Landi printer hub. Landi can mean an external network printer or a POS terminal with a built-in printer, so choose the model/type first.

​
Supported Connections

​
Configure External Network Printers

  1. Configure the Landi printer network from PC or vendor utility if needed.
  2. Print the Landi printer self-test page and note the IP address and port.
  3. Open Restaurant > Settings > Device Management.
  4. Add a Printer device.
  5. Set Connection Config to Network.
  6. Enter the Landi printer IP address and port.
  7. Configure Template for the printer job.
  8. Connect the printer to the correct POS from Connected Devices.

​
Model Pages

Landi Network Printers

External Ethernet/Wi-Fi printer setup for Plato.

Landi Built-In Terminals

Built-in printer setup for Landi Android POS terminals.

​
Configure Built-In Terminal Printers

For Landi POS terminals with an internal printer, use Built-In Printer or Android Driver depending on the device setup. Use a clear printer name such as Landi Built-In Receipt so staff can tell it apart from external kitchen or bar printers.

​
Checks

For external Landi printers, check Ethernet or Wi-Fi, IP address, paper, and cover. For terminal printers, confirm the Plato device is using the built-in or Android driver path and test a receipt from the same terminal.

​
Manufacturer Reference