Skip to main content
Use this page as the Sunmi printer hub. Sunmi can mean an external network printer or a POS terminal with a built-in printer, so choose the model/type first.

​
Supported Connections

​
Configure External Network Printers

  1. Configure the Sunmi printer network from PC or Sunmi utility if needed.
  2. Print the Sunmi printer self-test page and note the IP address and port.
  3. Open Restaurant > Settings > Device Management.
  4. Add a Printer device.
  5. Set Connection Config to Network.
  6. Enter the Sunmi printer IP address and port.
  7. Configure Template for the printer job.
  8. Connect the printer to the correct POS from Connected Devices.

​
Model Pages

Sunmi NT311 / Cloud Printer

External network kitchen/receipt printer setup over Ethernet or Wi-Fi.

Sunmi Built-In Terminals

Built-in printer setup for Sunmi Android POS terminals.

​
Configure Built-In Terminal Printers

For Sunmi POS terminals with an internal printer, use Built-In Printer or Android Driver depending on the device setup. Use a clear printer name such as Sunmi Built-In Receipt so staff can tell it apart from external kitchen or bar printers.

​
Checks

For external Sunmi printers, check Ethernet or Wi-Fi, IP address, paper, and cover. For terminal printers, confirm the Plato device is using the built-in or Android driver path and test a receipt from the same terminal.

​
Manufacturer Reference