Skip to main content
Use this page as the Oscar printer hub. Exact button labels and utilities can vary by Oscar model, so use the printed self-test page and printer manual when the model differs.

​
Supported Connections

​
Configure In Plato

  1. Configure the Oscar printer network from PC if needed. See Oscar Network 80mm Printers.
  2. Print the Oscar printer self-test page and note the IP address and port.
  3. Open Restaurant > Settings > Device Management.
  4. Add a Printer device.
  5. Set Connection Config to Network.
  6. Enter the Oscar printer IP address and port.
  7. Configure Template for receipts, kitchen tickets, void tickets, reports, or cash drawer.
  8. Connect the printer to the correct POS from Connected Devices.

​
Model Pages

Oscar Network 80mm

Ethernet/Wi-Fi setup, self-test, PC configuration, and reset checklist.
Keep Oscar printers on the same local network as the POS device. Ethernet is preferred for fixed stations. Wi-Fi is acceptable when the signal is strong and the printer does not move.

​
Checks

If the Oscar printer does not print, check power, paper, closed cover, network lights, Wi-Fi signal, and whether the IP address in Plato matches the self-test page.